KOBOLD型MIK流量計優勢總代理
KOBOLD 新型KOBOLD型MIK流量計用于測量和監測管道中的中小流量導電液體。該設備根據電磁測量原理工作。根據法拉第磁感應定律，在穿過磁場的導體中感應電壓。導電測量劑用作移動的導體。
測量介質中感應的電壓與流速成正比，因此是體積流量的值。流動的介質必須具有zui小的導電率。感應電壓由兩個與測量介質接觸并傳送到測量放大器的傳感電極拾取。流量將根據管道的橫截面積計算。
測量不依賴于工藝液體及其材料特性，如密度，粘度和溫度。該設備可能配備了開關，頻率或模擬輸出。此外，還有一個小型電子系統可供選擇，其中包含一個開關和一個模擬輸出。該設備系列由可選的配料和計數電子系統完成。
計數器電子系統顯示顯示屏*行的當前流量，并顯示第二行的部分或整體體積。計量電子系統控制簡單的灌裝工作，并測量流量，總體積和灌裝量。模擬輸出和兩個繼電器輸出可用于進一步處理信號。
磁感應流量計/監測儀MIK
測量范圍：0.05 - 1.0 - 35 - 700 l / min液體
連接：G?... G2?外螺紋
材料：PPS /不銹鋼，PVDF /哈氏合金，鉭
pmax：10巴
zui高溫度：80°C
準確度：滿量程的±2％
開關點，頻率或模擬輸出
LED指示與2開放收藏家或
4 - 20 mA / 1集電極開路，計數器，配料器
KOBOLD型MIK流量計優勢總代理

The new KOBOLD flow meter Type MIK is used for measuring and monitoring smaller and medium-sized flow of conductivity liquids in pipes. The device operates according to the  electromagnetic measurement principle. According to Faraday’s Law of magnetic induction a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor.

The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow. The flowing  media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifier. The  flow rate will be calculated based on the cross sectional area of the pipe.

The measurement is not depending on the process liquid and its material properties such as density, viscosity and temperature. The device may be equipped with a switch, frequency or analogue output. Moreover, there is a compact electronic system to be selected from, which contains a switch and an analogue output. The device series is completed by an optionally obtainable dosing and counter electronic system.

The counter electronics system shows the current flow rate on the first line  of the display and shows the partial or overall volume on the second line. A dosing electronic system controls simple filling duties and also measures the flow rate, overall volume and filling volume. The analogue output and two relay outputs can be utilised for the further processing of signals.

Magnetic Inductive Flowmeter/-monitor MIK

Measuring range: 0.05 - 1.0 ... 35 - 700 l/min liquid
Connection: G ½ ... G 2¾ male thread
Material: PPS/stainless steel, PVDF/Hasloy, tantalum
pmax: 10 bar
tmax: 80°C
Accuracy: ±2 % of full scale
Switchpoint, frequenz or analogue output
LED-Indication with 2 open collectors or
4 - 20 mA/1 open collector, counter, batcher

KOBOLD型MIK流量計優勢總代理